Anderson Composite Carbon Fiber Components 6th Generations Mustangs is one of the many products lines that RPI Designs handles from Anderson Composite. They have been around for a while specializing in fiberglass and carbon fiber body components for late model domestic vehicles. More and more people have been realizing that carbon fiber offers more to a car than just making it lighter. With the installation of carbon fiber you are getting that race car look for your street car, it shows the weave pattern you can see through the clear coat. It is a easy way to changing the look of you car and giving it a more much aggressive look. Some of the Carbon Fiber body components offered by Anderson Composite are redesigned to help improve not only the look but the performance of the vehicle. We are going to take a closer look at some of these components in this article.
The Anderson Composite 2015-2017 Ford Mustang Carbon Fiber Rear Diffuser is one of these products that improves the look and helps with some of the high speed stability of your Mustang. At higher track speeds air is flowing on the top and on the bottom of your car. At speed this air will meet together at the rear of your car. With a diffusor installed on your car it helps to accelerate the flow of air under the car, creating an area of low pressure, thus increasing down force. The added benefit on top of the added down force is that fact it does look really cool on the new Mustangs!!
The Anderson Composite 2015-2017 Ford Mustang Carbon Fiber Hood Rear Seat Delete is another item that will help make some improvement. Racers always find out ways of making a car faster, one way is by removing un necessary weight. But this leaves a problem because most people do not want to drive around with nothing in their interior. Then this carbon fiber seat delete is your best option, it is designed to cover up where the rear seat once were. It is a very slick old school option with a Carbon Fiber twist.
The Anderson Composite 2015-2017 Ford Mustang Carbon Fiber Front Chin Splitter Type AR is another part that not only makes the Mustang look like an all out race car but helps with high speed stability. Like we discussed earlier about creating downforce the splitter is designed to help increase down force on the front of the car. As the car’s front bumper is hitting the air at high speeds the front splitter is sticking out more and creating a ledge for the air to push down on the front of the car. Like the name it is splitting the air to help increase down force so your Mustang will feel more stable at track speeds.
Check out all the Anderson Composite Carbon Fiber 6th generation Mustang Components available at RPI Designs.