- 10% off
Subtotal:$0.00
THIS IS NOT JUST ANOTHER POWER DUCT!
The VR was engineered for stock to high horsepower cars of 500-700 rear wheel HP! This unit can be used with the VR B2 System, Blackwing, K&N and many more and use it you should, because the VR out flowed the very best by over 15% @ 28 inches of water and 20% @10 inches through the throttle body!
We only flow through the Throttlebody, flowing a duct by itself tells you nothing of its true flow capabilities as delivered into the intake manifold. | |
Other features include: 1. Relocated MAF position- WE move the MAF closer to the motor for a cleaner read, a must for any heads cam or stroker motor cars. 2. Superior quality in construction- Here we use a resin reinforced Crosslink Material that is set at a specified charge weight for strength and longevity, More expensive ,yes, but 50% stronger than other systems. 3. Full adjustability- this enables the unit to fit a wide range of intake and filter combinations so you can use the VR power duct even if you don’t have a VR-B2 system. 4. Positive clamp rings front and rear 5. Optional forced induction models available, capable of sustained boost levels of 18PSI@175deg |
